Teck 90 Cable,flexible armoured cable,UL Cable,Power Cable

OVERVIEW

SPECIFICATIONS

CONSTRUCTION

PARAMETER

LEAVE YOUR FEEDBACK

Overview

Teck 90 cable, a flexible armoured cable originally designed for use in Canadian mines, has become a key component for the distribution of electricity through a broad range of industrial, commercial and manufacturing facilities.
Teck 90 cable combination of interlocking flexible armour with two layers of PVC jacket provide a rugged, compact and flexible cable that is resistant to corrosion, water and mechanical abuse. It is designed for use in wet or dry locations with a maximum conductor temperature of 90˚C and a low temperature rating of -40°C.

Application:

Teck 90 cable is used extensively by the pulp and paper, chemical, mining, petrochemical and manufacturing industries in a broad range of applications, especially where cable may be subjected to mechanical damage and corrosive chemicals.
Commercial applications for Teck cable include apartment buildings and commercial complexes. Teck cable is also an economical alternative as the need for conduits or ducts and pull boxes is eliminated.
Teck 90 cable is approved for use; in wet and dry locations, indoor and outdoor, in exposed and concealed wiring, in ventilated, non-ventilated and ladder type cable trays, for direct earth burial and for service entrance installations, above and below ground. It is ‘HL’ rated for use in all hazardous locations when used with optional 'HL' approved connectors.

Standards:

•CSA FT1 & FT4
•CSA C22.2 No. 131 for Teck cables rated up to and including 5kV
•CSA C68.10 for shielded Teck cables rated 5kV and above (C68.10 pending)
•CSA C22.2 No. 0.3 Clause 4.11.4 FT4 flame test
•CSA C22.2 No. 174 for use in the following hazardous locations (HL):
-Class 1 Group A, B, C, D. Division 1 & 2
-Class II Group E, F, G. Division 1 & 2
-Class III
•ICEA S-66-524 / NEMA WC7 for Teck cables rated above 5kV
•IEEE 383 &1202 (70,000 BTU/hr) flame test
•ICEA T-29-520 (210,000 BTU/hr) Vertical Cable Tray Flame Test
•ICEA T-30-520 (70,000 BTU/hr) Vertical Cable Tray Flame Test
*Refer to CE Code for details

Specifications

Low Voltage

UV Resistance

Medium Voltage

Water Resistance

Working Temperature 90℃

Cold Resistant -40℃

Flame Retardant

construction

Conductor:

Class B compact or compressed concentric stranded soft drawn bare copper per ASTM, conforming to CSA C68.3.

Conductor Shielding:

A thermoset semi-conducting shield is extruded over the conductor on all cables rated over 1kV. Minimum thickness in accordance with CSA C68.3, Table 2.

Insulation:

Cross-linked polyethylene (XLPE), meeting the requirements of CSA RW90 for cables rated up to and including 1kV. For cables rated 5kV and above, the TR-XLPE insulation meets the requirements of CSA Standard C68.3 M92.

Metallic Shield:

A 15% gapped copper tape shield meeting the requirements of CSA C68.3 is helically applied to the insulated conductors in three conductor shielded cables rated 5kV and above. In single conductor cables, the concentric ground serves as the metallic shield and bonding conductor.

Bonding (Ground) Conductor:

Class B stranded soft bare copper conductor, in accordance with CSA C68.3 and CSA C22.2 No. 131, is included in the assembled cable for multiconductor cables. In single conductor cables, the concentric ground serves as the metallic shield and bonding conductor.

Fillers and Core Binder Tape:

Where required, suitable fillers to make round and core binders may be used.

Inner Jacket:

Flame-retardant and moisture resistant PVC Jacket is applied over the core in accordance with CSA C22.2 No. 131.

Armour:

Flame-retardant and moisture resistant PVC Jacket is applied over the core in accordance with CSA C22.2 No. 131.

Outer Jacket:

A low temperature (-40°C), flame-retardant, moisture and sunlight resistant PVC jacket is applied over the armour in accordance with CSA C22.2 No. 131. Minimum thickness in accordance with CSA 68.3, Table 21. Complete cable FT4 rated.

Colour Code:

TECK 90 CABLES:
•2 conductor cables are colour coded black and white
•3 conductor cables are colour coded black, red and blue
•4 conductor cables are colour coded black, red, blue and white
•5 or more conductor cables are black and alpha numeric coded
ARMOURED CONTROL:
•Conductor #1 is white, the remaining conductors are black and numbered

Options:

•Aluminum phase conductor and bonding conductor
•Ethylene-propylene rubber (EPR) insulation for shielded Teck cables rated 5kV and above •Overlapping copper tape shield
•Sequential marking on outer jacket
•Special ground wire requirements: 50% of phase conductor or more than one ground conductor
•Fully filled core for multiconductor Teck cables rated 5kV and above
•Galvanized steel interlocked armour (GSIA) for multiconductor Teck cables
•Coloured outer jacket
•Vertical riser Teck
•Variable frequency drive (VFD) Other constructions available upon request

parameter

Armoured Control 16 AWG 600V

Multiconductor 14 AWG 600V

Multiconductor 12 AWG 600V

Multiconductor 10 AWG 600V

Control Composite 3 Power & 3 Control Conductors 600V

Single Conductor 1000V

Two Conductor 1000V

Three Conductor 1000V

No. of Conductor	AWG Size		Approximate Diameter (Over)			Net Weight w/ Armour
No. of Conductor	Cond.	Bond Wire	Inner Jacket (in.)	Armour (in.)	Outer Jacket (in.)	LB/MFT	LB/MFT
2	16	16	0.336	0.536	0.650	177	264
4	16	16	0.386	0.586	0.700	217	323
6	16	16	0.446	0.686	0.798	264	393
8	16	16	0.545	0.785	0.897	300	447
12	16	16	0.626	0.826	0.950	407	605
20	16	16	0.749	0.949	1.070	545	811
30	16	16	0.942	1.172	1.280	811	1206
50	16	16	1.149	1.379	1.480	1141	1697

No. of Conductors	AWG Size		Insulation Thickness (in.)	Approximate Diameter (Over)				Copper Content		Net Weight w/ Armour
No. of Conductors	Cond.	Bond Wire	Insulation Thickness (in.)	Insul. (in.)	Inner Jacket (in.)	Armour (in.)	Outer Jacket (in.)	LB/ MFT	KG/ KM	LB/ MFT	KG/ KM
2	14	14	0.030	0.130	0.360	0.580	0.670	39	58	195	290
4	14	14	0.030	0.130	0.420	0.640	0.720	68	101	256	381
6	14	14	0.030	0.130	0.500	0.720	0.800	95	142	316	471
8	14	14	0.030	0.130	0.570	0.790	0.870	117	174	373	555
12	14	14	0.030	0.130	0.680	0.900	0.990	176	262	511	761
20	14	14	0.030	0.130	0.910	1.130	1.210	285	424	789	1174
30	14	14	0.030	0.130	1.060	1.280	1.360	402	599	1015	1511
50	14	14	0.030	0.130	1.300	1.520	1.600	661	984	1463	2178

No. of Conductors	AWG Size		Insulation Thickness (in.)	Approximate Diameter (Over)				Copper Content		Net Weight w/ Armour
No. of Conductors	Cond.	Bond Wire	Insulation Thickness (in.)	Insul. (in.)	Inner Jacket (in.)	Armour (in.)	Outer Jacket (in.)	LB/ MFT	KG/ KM	LB/ MFT	KG/ KM
2	12	14	0.030	0.150	0.400	0.620	0.700	55	82	228	340
4	12	14	0.030	0.150	0.470	0.690	0.770	96	143	293	436
6	12	14	0.030	0.150	0.590	0.810	0.890	137	204	416	619
8	12	14	0.030	0.150	0.640	0.860	0.940	177	264	492	732
12	12	14	0.030	0.150	0.790	1.010	1.100	261	389	653	972
20	12	14	0.030	0.150	1.010	1.230	1.320	424	631	986	1468
30	12	14	0.030	0.150	1.180	1.400	1.490	630	938	1320	1965
50	12	14	0.030	0.150	1.450	1.670	1.770	1044	1553	2055	3058

No. of Conductors	AWG Size		Insulation Thickness (in.)	Approximate Diameter (Over)				Copper Content		Net Weight w/ Armour
No. of Conductors	Cond.	Bond Wire	Insulation Thickness (in.)	Insul. (in.)	Inner Jacket (in.)	Armour (in.)	Outer Jacket (in.)	LB/ MFT	KG/ KM	LB/ MFT	KG/ KM
2	10	12	0.030	0.180	0.450	0.670	0.750	87	130	275	410
4	10	12	0.030	0.180	0.555	0.740	0.830	150	223	413	615
6	10	12	0.030	0.180	0.660	0.880	0.960	217	323	515	766
10	10	12	0.030	0.180	0.860	1.080	1.160	348	518	828	1232
15	10	12	0.030	0.180	1.000	1.220	1.300	512	762	1084	1613
25	10	12	0.030	0.180	1.250	1.470	1.550	835	1243	1612	2399
40	10	12	0.030	0.180	1.490	1.710	1.810	1321	1966	2278	3390

14 AWG
AWG Size			Insulation Thickness (in.)	Approximate Diameter (Over)			Copper Content		Net Weight w/ Armour
Control	Power	Bond Wire	Insulation Thickness (in.)	Inner Jacket (in.)	Armour (in.)	Outer Jacket (in.)	LB/ MFT	KG/ KM	LB/ MFT	KG/ KM
14	12	14	0.300	0.560	0.780	0.860	114	170	356	530
14	8	10	0.450	0.690	0.950	1.000	208	310	541	805
14	4	8	0.450	0.890	1.140	1.250	485	722	972	1446
14	1	6	0.550	1.140	1.390	1.500	911	1356	1539	2290
14	2/0	6	0.550	1.320	1.570	1.710	1378	2051	2150	3199
14	4/0	4	0.550	1.550	1.800	1.940	2167	3225	3080	4583

AWG Size			Insulation Thickness (in.)	Approximate Diameter (Over)			Copper Content		Net Weight w/ Armour
Control	Power	Bond Wire	Insulation Thickness (in.)	Inner Jacket (in.)	Armour (in.)	Outer Jacket (in.)	LB/ MFT	KG/ KM	LB/ MFT	KG/ KM
12	10	12	0.030	0.665	0.865	0.979	180.2	268.0	- 431	641
12	6	8	0.060	0.914	1.134	1.250	361.6	538.0	822	1223
12	2	6	0.060	1.026	1.246	1.362	772.3	1149.0	1307	1944
12	1/0	6	0.080	1.263	1.483	1.603	1143.3	1701.0	1840	2737

AWG Size		Insulation Thickness (in.)	Approximate Diameter (Over)				Copper Content		Net Weight w/ Armour
Cond.	Bond Wire	Insulation Thickness (in.)	Insul. (in.)	Inner Jacket (in.)	Armour (in.)	Outer Jacket (in.)	LB/ MFT	KG/ KM	LB/ MFT	KG/ KM
4	6	0.060	0.350	0.490	0.730	0.810	211	314	410	610
2	6	0.060	0.420	0.560	0.780	0.870	286	426	510	760
1/0	4	0.080	0.530	0.690	0.910	1.000	458	682	760	1130
3/0	3	0.080	0.630	0.810	1.030	1.120	685	1020	1080	1610
250	2	0.090	0.750	0.990	1.210	1.290	980	1459	1490	2210
350	1	0.090	0.815	1.120	1.360	1.445	1340	1994	1910	1910
500	1/0	0.090	0.925	1.200	1.475	1.560	1841	2604	2510	3740
750	2/0	0.090	1.160	1.370	1.590	1.690	2570	3825	3510	5230

AWG Size		Insulation Thickness (in.)	Approximate Diameter (Over)				Copper Content		Net Weight w/ Armour
Cond.	Bond Wire	Insulation Thickness (in.)	Insul. (in.)	Inner Jacket (in.)	Armour (in.)	Outer Jacket (in.)	LB/ MFT	KG/ KM	LB/ MFT	KG/ KM
14	14	0.045	0.170	0.430	0.650	0.730	39	58	219	326
10	12	0.045	0.210	0.510	0.730	0.810	86	128	291	433
6	8	0.060	0.310	0.720	0.940	1.020	215	320	556	827
3	6	0.060	0.380	0.930	1.150	1.230	415	618	905	1347
1	6	0.080	0.490	1.120	1.340	1.420	612	911	1235	1838
2/0	6	0.080	0.580	1.280	1.500	1.580	922	1372	1660	2470
4/0	4	0.080	0.690	1.480	1.700	1.790	1466	2182	2350	3497
300	4	0.090	0.760	1.765	2.005	2.115	2018	3003	3341	4972
400	3	0.090	0.850	1.945	2.185	2.295	2687	3999	4147	6171
750	1	0.090	1.160	2.450	2.670	2.790	4941	7353	6872	10226

AWG Size		Insulation Thickness (in.)	Approximate Diameter (Over)				Copper Content		Net Weight w/ Armour
Cond.	Bond Wire	Insulation Thickness (in.)	Insul. (in.)	Insul. (in.)	Armour (in.)	Outer Jacket (in.)	LB/ MFT	KG/ KM	LB/ MFT	KG/ KM
14	14	0.045	0.170	0.470	0.670	0.760	52	77	261	388
10	12	0.045	0.210	0.590	0.790	0.880	124	185	374	557
6	8	0.060	0.310	0.780	1.030	1.130	300	447	724	1078
3	6	0.060	0.380	0.970	1.220	1.300	582	866	1136	1691
1	6	0.080	0.490	1.210	1.440	1.540	866	1288	1593	2371
2/0	6	0.080	0.580	1.380	1.650	1.770	1327	1974	2225	3311
4/0	4	0.080	0.690	1.600	1.860	1.980	2109	3138	3207	4772
300	4	0.090	0.760	1.885	2.125	2.235	2961	4406	4460	6637
400	3	0.090	0.850	2.075	2.315	2.455	3948	5875	5719	8511
600	2	0.090	1.005	2.410	2.650	2.790	5868	8733	7948	11828
1000	1	0.090	1.310	3.080	3.280	3.440	9612	14303	12184	18130

Other Related Products

Metal-Clad Cable

Back to List